2.3.2
Friction Feed (ron paper and sheet paper)
(1) Open the print cover, and pull the roller shaft toward the front of the printer.
(2) Move the print head carrier assembly to the left side of the printer.
(3) Push the release lever to the rear of the printer.
(4) Insert the paper into the paper inlet on the paper cover (behind the pal;>er cover for roll paper).
When the paper end appears on the platen, set the paper properly, pull the release lever toward
the front (to the "friction feed" position), and reposition the roller shaft and print cover. (See
Fig. 12.)
Paper End
Paper
Roll Paper Inlet
"7""-+-_
Paper Cutter
Release Lever
·+------""~rv/
Fig. 12 Friction Feed Set-up
-10-