Panasonic FZ-G1 Series Operating Instructions Manual page 18

First-time Operation
NOTE
 To set the password, proceed as follows.
A Touch
B Touch [Add] under "Password".
 Set the key entry mode to English ("ENG") and enter characters.
 The keyboard layout can be added or changed in the following steps.
A Touch
B Touch a language and touch [Options].
C Touch [Add a keyboard] and choose a keyboard from the list.
 Remember your password. If you forget the password, you cannot use Windows. Creating a
password reset disk beforehand is recommended.
 PC Information Viewer
 This computer periodically records the management information of the flash memory, etc. The
maximum data volume for each record is 1024 bytes.
This information is only used for estimating the cause in the case when the flash memory goes
down by any possibility. They are never sent to outside via network nor used for any other
purpose except for the purpose described the above.
 To disable the function, add the check mark for [Disable the automatic save function for man-
agement information history] in [Hard Disk Status] of PC Information Viewer, and touch [OK].
Then follow the on-screen instructions.
 ( Operating Instructions - Reference Manual "Troubleshooting" "Checking the Comput-
er's Usage Status")
18
8 Create a recovery disc
A recovery disc allows you to install OS and restore its factory default
condition, in case, the recovery partition of the flash memory is damaged.
Refer to 
"Important Operation/Settings" "Create a Recovery Disc" about cre-
ating the disc.
(Start) - (Settings) - [Accounts] - [Sign-in options].
(Start) - (Settings) - [Time & language] - [Region & language].
OPERATING INSTRUCTIONS - Reference Manual