Panasonic CF-31 Series Operating Instructions Manual page 9

Ÿ Touching the keyboard, touch pad or touchscreen (only for model with touchscreen)
Ÿ Closing the display
Ÿ Turn on/off the wireless switch
l When the CPU temperature is high, the computer may not start up to prevent
overheating of the CPU. Wait until the computer cools down, and then turn the
power on again. If the computer does not power on even after cooling down,
contact Panasonic Technical Support.
l Any changes from the default setting of the Setup Utility must not be made until
the First-time Operation is completed.
6
<For MUI OS model>
Select language and OS (32-bit or 64-bit).
CAUTION
l Carefully choose your language because you cannot change it later. If you set a
wrong language, you need to reinstall Windows.
A Select language and OS (32bit or 64bit) and click [OK].
The language setting will start by clicking [OK] on the confirmation screen.
You can return to the "Select OS" screen by clicking [Cancel].
The language and OS setting will be completed in about 15 minutes.
B When termination screen is displayed, click [OK] to turn off the computer.
7 Setup Windows.
Select language and click [Next].
Turn on the computer.
Follow the on-screen instructions.
l The computer restarts several times. Do not touch the keyboard or touch
pad, and wait until the drive indicator
l After the computer is turned on, the screen remains black or unchanged for
a while. This is not a malfunction. Wait for a moment until the Windows setup
screen appears.
l During setup of Windows, use the touch pad and clicking to move the pointer
and to click an item.
l Setup of Windows will take approximately
20 minutes.
Go to the next step, confirming each message on the display.
l You can set the Wireless Network after the setup of Windows is complete.
If "Get online" is displayed, select "Skip this step".
"Join a wireless network" screen may not appear.
Verify the time zone, date and time.
l
has turned off.
5 minutes /
9