Panasonic CF-31 Series Operating Instructions Manual page 10

First-time Operation
NOTE
l PC Information Viewer
This computer periodically records the management information of the hard disk, etc. The maximum data volume for each
record is 1024 bytes.
This information is only used for estimating the cause in the case when the hard disk goes down by any possibility. They
are never sent to outside via network nor used for any other purpose except for the purpose described the above.
To disable the function, add the check mark for [Disable the automatic save function for management information history]
in [Hard Disk Status] of PC Information Viewer, and click [OK].
(è Reference Manual "Checking the Computer's Usage Status")
<For MUI OS model>
l
In the default settings, a shortcut icon for Korean language is on the Desktop screen. You may delete the icon if not nec-
essary.
If the recovery partition is deleted, you cannot create Recovery Disc(s).
l
n Before using wireless function
A Slide the wireless switch to ON.
B Display "Charm" and click
Set [Wi-Fi] to [On] (for wireless LAN).
set [Mobile broadband] to [On] (for wireless WAN).
set [GPS] to [On] (for wireless WAN).
set [Bluetooth] to [On] (for Bluetooth).
10
CAUTION
l You can change the user name, password, image and security setting after
setup of Windows.
l Remember your password. If you forget the password, you cannot use Win-
dows. Creating a password reset disk beforehand is recommended.
l Do not use the following words for user name: CON, PRN, AUX, CLOCK$, NUL,
COM1 to COM9, LPT1 to LPT9, @. In particular, if you create a user name (ac-
count name) that includes the "@" mark, a password will be requested at the
log-on screen, even if no password has been set. If you try to log on without en-
tering a password, "The user name or password is incorrect." may be displayed
and you will not be able to
(è page 21).
l Use standard characters as a computer name: numbers 0 through 9, uppercase
and lowercase letters from A to Z, and the hyphen (-) character.
If the error message "The computer name is not valid" appears, check if charac-
ters other than the above are not entered. If the error message still remains on
the display, set the key entry mode to English ("EN") and enter characters.
<For MUI OS model>
l When setting up the keyboard, choose the appropriate one to your computer.
Otherwise, input by the keyboard may become unavailable.
8 Update the on-screen manual.
A Connect a network to the internet.
For further information, refer to
B Update the on-screen manual.
Double-click [Manual Selector] on the desktop.
Follow the on-screen instructions.
9 Create the recovery disc.
A recovery disc allows you to install OS and restore its factory default condition,
in case, for example, the recovery partition of the hard disk is damaged. We rec-
ommend creating a recovery disc before you begin using the computer.
Refer to è Reference Manual "Recovery Disc Creation Utility" about creat-
ing the disc.
- [Change PC Settings] - [Network] - [Airplane mode].
sign in / log on to Windows
Connect to a network.