Output Setup - Panasonic AG-DVX200 Manual

3. MENU settings

OUTPUT SETUP

Note: Items marked  will not function when OUTPUT BIT item is set to "4:2:2 10bit".
Menu item
OUTPUT SEL
RESOLUTION
SDI REMOTE
REMOTE REC LINK
SDI EDH
SDI AUDIO GAIN
CHG

DOWN CONV.
HDMI UHD
OUTPUT LIMIT
HDMI TC OUTPUT
VOLUME
TEST TONE
VIDEO SETUP
LCD/EVF OUTPUT
Description
Select video and audio
output.
Set resolution of output
video signal.
Inserts the REC/PAUSE
trigger signal on SDI OUT.
This allows the camera to
control REC/PAUSE
functions of external
recorder via SDI OUT signal.
Set the way to control the
remote REC/PAUSE of an
external recorder.
EDH signal is embedded in
the SDI stream.
Enabled in 480i or 576i
mode only.
Set the audio gain of SDI
embedded audio signal.
Set the display mode of a
down converted image.
Set the frame rate limit of
HDMI OUT while in
UHD 2160/59.94p 150M and
UHD 2160/50.00p 150M
record modes.
Insert timecode signal on
HDMI OUT.
Headphone volume
adjustments can be made
with the built-in jog dial.
Set the test tone level.
Set the pedestal setup level.
Enabled in 480i mode only.
Set the way to use the LCD
and EVF monitors.
Value
(Factory default setting underlined)
HDMI / SDI / SDI+AV
SYSTEM /1080p /1080i /DOWN CONV.
The type of signal available on the
output varies and will depend on REC
format setting.
See P.61 for the details.
ON / OFF
ON: Remote REC/PAUSE can be
performed with the REC button on the
AG-DVX200.
OFF: Remote REC/PAUSE can be
performed with the user assignable
buttons (AUTO REC function) on the
AG-DVX200.
ON / OFF
0dB / -6dB / -12dB
SIDE CROP / LETTERBOX /
SQUEEZE
System freq = 59.94Hz
59.94p: Output in 2160/59.94p
29.97p: Output in 2160/29.97p
System freq = 50.00Hz
50.00p: Output in 2160/50.00p
25.00p: Output in 2160/25.00p
ON / OFF
ON / OFF
OFF / LEVEL1 (loud) / LEVEL2 (low)
0% / 7.5%A
AUTO / LCD / EVF
26