Troubleshooting - Husqvarna QC80 Operator's Manual

CAUTION:
charger to a power outlet with the
voltage and frequency specified on the
rating plate.
2. Connect the battery to the battery charger. The
charging LED comes on.

TROUBLESHOOTING

Condition
The charging LED is red.
The charging LED flashes
red (QC80).
The charging LED flashes
green (QC250).
The charging LED flashes
red (QC250).
857 - 007 - 26.03.2020
Only connect the battery
Possible faults
Permanent battery charger
error.
Temperature deviation, the
battery is too cold or too
hot to use or charge.
Faulty battery
3. Remove the battery from the battery charger.
4. Pull the power plug to disconnect the battery
charger from the power outlet. Do not pull the
power cord.
Possible procedure
Speak to your dealer.
Let the battery cool down or warm it up. When
the battery has the correct temperature, it can be
used or charged again. Use the battery charger
in ambient temperatures between 5 °C (41 °F)
and 40 °C (104 °F).
Speak to your dealer
9