Royal Sovereign ARP-912 Owner's Manual page 10

PRODUCT OPERATION
Boot State:
•
When you select a mode, the machine will enter boot state. The front display, as well as the
indicator light of the mode selected will blink for a few seconds to allow the machine to process
the selection. Once the machine has processed the change, the indicator light will turn solid and
the new mode will begin.
Fan Operation:
•
In the boot state, press the mode icon to switch to fan mode. The front display, as well as the
indicator light will blink for a few seconds when selected and turn solid when confirmed.
•
In fan mode, the upper blower works and the compressor does not work.
•
Press the wind speed icon to switch between high and low wind speeds.
Auto Mode:
•
In the boot state, press the mode icon to switch to automatic mode. The front display, as well
as the indicator light will blink for a few seconds when selected and turn solid when confirmed.
•
When the machine is powered on for the first time or if the machine has been off for more than
30 minutes, the machine enters automatic mode by default.
•
When switching to automatic mode from other modes or from powering on the air conditioner
(first time or when off for over 30 minutes), the machine will automatically set to the following:
•
If room temperature is > 75°F (24°C) auto set to cooling mode
•
If room temperature is > 72°F (22°C) and < 75°F (24°C) auto set to fan mode
•
If room temperature is < 72°F (22°C) auto set to single cold type ventilation
•
Once in automatic mode, the room temperature will change, while the set mode will remain the
same. The set mode will not change until automatic mode is complete.
Cooling Operation:
•
In the boot state, press the mode icon to switch to cooling mode. The front display, as well as
the indicator light will blink for a few seconds when selected and turn solid when confirmed.
•
Press the increase or decrease icons to set the desired temperature. The temperature range is
from 59-88°F (15-31°C). The front and top digital displays will show the current set
temperature.
•
Press the wind speed icon to switch between high and low wind speeds.
10
•
For optimal operation, shorten the length of the air duct and keep from direct sunlight
.