Table of Contents
Advertisement
Available languages
Available languages
The radiator will now function automatically each day at the
times set.
Please note: To use the appliance without program-
ming, push all the teeth outwards.
MAINTENANCE
-
Always unplug from the mains socket before cleaning.
-
During the season when the appliance is in use, clean
the air intake and outlet grilles regularly using a vacuum
cleaner.
-
To clean the dust filter, remove the rear grille by pulling
it outwards.
Remove the dust filter which retains impurities in the air
drawn in from the room, blow on it lightly then replace
in the appliance.
-
Never use abrasive powders or solvents to clean the
appliance.
TROUBLESHOOTING
PROBLEM
The appliance doesn't work
CAUSE
Be sure it is plugged in and that the electri-
cal outlet is working.
Check for any obstruction.
The power selector is in the "0" position.
The thermostat may be set too low.
Setting the timer
Plug into the outlet.
Remove the obstruction, unplug the heater
and let the appliance cool down. If the appli-
ance doesn't work please contact the nearest
service center.
Turn the functiom selector to the position
1,2,3 or
Turn the thermostat clockwise to a higher
setting until the heater restarts.
Make sure the timer is correctly set to local
time and check the position of the teeth.
7
SOLUTION
.
Advertisement
Table of Contents
