DeLonghi HFX66V15C Instructions For Use Manual page 8

Instant ceramic tower heater
Hide thumbs Also See for HFX66V15C:
Table of Contents

Advertisement

Available languages

Available languages

TROUBLESHOOTING
PROBLEM
PF display
Product doesn't turn on
A dot is flashing and unit is off
The display shows "Ht" blinking
Please contact our toll free hotline at 1 (800) 322-3848
CAUSE
Temperature sensor is not working
properly
Check that the plug is connected to the
outlet
Auto-start is on
Room temperature reaches the set
temperature
The tip-over switch has been activated Make sure the appliance is standing
The internal temperature is too high.
The air intake or outlet grille is
obstructed
8
SOLUTION
The product needs to be serviced, contact
our toll free number for assistance
Plug in
Wait till time elapsed or press the but-
ton (E) twice to cancel the auto-start
and push the button (A)
Use the "+" button to increase the set
temperature
upright on a flat surface, if the problem
persists contact our toll free number to
assist you
Check the appliance is correctly
positioned respecting the minum
distances from the wall, or objects, as
indicated on the instruction manual,
if not, position the appliance correctly
Remove the obstruction
Disconnect the plug from the outlet
and let the appliance cool down. After
few minutes plug the appliance again.
If the appliance doesn't work please
contact the De longhi toll free number

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents