Configure A Headset Template - Cisco 700 Series Administration Manual

Cisco Headset 700 Series Administration on Cisco Unified Communications Manager
Parameter
Active Noise
Cancellation

Configure a Headset Template

Use this procedure to configure a headset template with customized settings that you can apply to Cisco
headsets. You can create a customized template or use the system-defined Standard Default Headset Template.
Note
The Standard Default Headset Configuration Template is a system-defined template. You can assign new
User Profiles to the Standard Default Headset Template but you can't edit the template. By default, all user
profiles are assigned to this template. To disassociate a user profile from this template, you must assign the
profile to a new template.
Procedure
Step 1
From Cisco Unified CM Administration, choose Device > Headset > Headset Template.
Step 2 Do either of the following:
• To edit an existing template, select the template.
• To create a new template, select any existing template and click Copy. The existing settings are applied
Step 3
Add a Name and Description for the template.
Step 4 Under Model and Firmware Settings, assign any customized headset settings that you want to apply to this
template. To add a new setting, click the Add button and configure the settings.
Step 5 Use the up and down arrows to move the User Profiles that you want to assign to this template to the Assigned
Uers Profiles list box. All users whom are assigned to those profiles will also be assigned to this headset
template.
Step 6 Click Save.
Step 7
Use the Set to Default button to return to the default template settings.
Step 8 Click Apply Config.
For a Standard Default Headset Configuration Template, the Apply Config button takes effect for the following:
• Devices owned by users you added to the Assigned User Profile list
• Anonymous devices
Range
Off, 0% – 100%,
Adaptive
to your new template.
Default Notes
100% Controls how much noise cancellation a the
headset . Off turns noise cancellation off while
100% means users have much more noise
cancellation. Adaptive turns on the Adaptive
Noise Cancellation feature. When Adaptive
Noise Cancellation is active, the headset
automatically adjusts noise cancellation based
on the surrounding environment.
Cisco Headset 700 Series Administration Guide
Configure a Headset Template
15