Filling The Clean Water Tank; Cleaning Your Carpet - Bissell TURBOCLEAN POWERBRUSH PET 2806 Series Manual

Filling the Clean Water Tank

For additional tips and tricks on filling your Clean Water Tank visit support.BISSELL.com.
1.
Remove the Clean Water
Tank by lifting straight up and
away from the machine.
4.
Add BISSELL formula to the
FORMULA line.

Cleaning Your Carpet

For additional carpet cleaning tips, head to support.BISSELL.com.
Tips Before Cleaning
• If cleaning an entire room, consider moving your furniture to another area.
• Use a dry vacuum cleaner over area before using your deep cleaner.
• Remove any large, solid debris before wet cleaning.
• Pretreat stains with BISSELL® Pretreat to improve performance on coffee stains and ground-in dirt.
1.
Plug into a proper outlet.
4 BISSELL.com
2.
Unscrew the cap at the
bottom of the tank.
5.
Replace and tighten the
cap.
2.
Turn the machine ON by
pressing the power switch.
3.
Fill with hot (140°F/60°C
MAX) tap water to the WATER
line. Do not use boiling water.
Do not heat water and/or tank
in the microwave.
6.
Replace the tank on the
machine until it "clicks" into place.
3.
Step on the recline pedal
located below the power
switch, and pull back on
handle to recline.
CONTINUED ON NEXT PAGE