Siemens TSi80 Series Operating Instructions Manual page 23

3 Fill the water tank. Never fill beyond the level
mark for maximum filling (10)!
4 Close the water inlet lid.
Tip:
To prolong the optimum steam function, you may
mix tap water with distilled water 1:1. If the tap water
in your district is very hard, mix tap water with
distilled water 1:2.
You can inquire about the water hardness with your
local water supplier.
ºC
2. Heating
Remove any labels or protective covering from
the soleplate (12).
1 Plug in the iron.
2 One beep will be heard.
3 "startStop Control" function will be activated and
the indicator lamp (2) will flash.
4 The iron will shift automatically to the
"autoSteam" mode and the indicator lamp (5) will
remain lit continuously.
5 The iron will shift automatically to the "allTextile"
programme. The "allTextile" indicator lamp (1)
will flash, indicating that the iron is heating up.
6 When the iron is ready to use, the indicator
lamp will remain lit continuously. Two beeps will
be heard.
45º
1x
2x
23
SIEM ENS