Tool management
4.1
Tool table
Tools with their complete operating data can be managed in the tool list.
● Tools are assigned to the desired magazine locations with the load function.
● For each tool, you can store the following data:
● Direct transfer of the tool from the list in the program or for measurement
Highlights
● All tool data at a glance
● Simple and secure handling via unmistakable tool names
SINUMERIK Operate - Turning, SINUMERIK 840D sl
Control system overview for machine tools' sales people, 09/2012
– Tool type (rougher, finisher, engraver, drilling and milling tools ....)
– Tool name in plaintext (ex.: "ROUGHING_80DEGREES")
– Max. of 9 cutting edges per tool
– Tool length and cutting plate geometry
– Nose angle for drills or number of teeth for milling tools
– Direction of spindle rotation and coolant (level 1 and 2)
☑ Basic configuration
4
25