Machine Spectrum - Siemens SINUMERIK 840D sl Manual

Introduction

1.2 Machine spectrum

1.2 Machine spectrum
The SINUMERIK 840D sl with the operating software SINUMERIK Operate is perfectly
suited for the following types of machines:
1. Single-slide turning machines with X and Z axes
2. Like 1.) with rotating tools (C axis mode)
3. Like 1.) or 2.) with additional Y axis
4. Like 1.), 2.) or 3.) with additional counterspindle for front and rear machining
10
– Turning operations
– Centric drilling on the end face
– Any drilling or milling on the end face and outer surface
– Any drilling or milling on the end face and outer surface
SINUMERIK Operate - Turning, SINUMERIK 840D sl
Control system overview for machine tools' sales people, 09/2012