Pioneer SX-319V-K Service Manual page 33

5
[2] Reset mode for numbers of protection detections
[Purpose]
For clearing all the counts of protection detections.
(This mode resets the counts of protection detections.)
[How to enter/exit]
During Standby mode, simultaneously press and hold the [STANDARD SURROUND] and [STANDBY/ON] keys
for 10 seconds to enter this mode.
The display will return to the normal indication when no key operation is performed for 5 seconds.
[Basic operations]
Key Operation
(STANDBY state)
[STANDARD SURROUND]
+ [STANDBY/ON]
(press and hold the keys
for 10 seconds.)
[ENTER key]
(Counter Clear end)
(Normal display)
*1 "5 (-> normal)" denotes that the display will return to the normal indication when no key operation is
performed for 5 seconds.
*2 Indication when the BD/DVD
function is selected
[Detailed explanations]
1. When the procedures for Reset mode for numbers of protection detections are completed, all the counters
will be reset to "000."
2. Prohibitions:
The protection detection counts cannot be cleared (reset to 000) with the MEMORY CLEAR process.
They can only be cleared when the procedures of Reset mode are completed.
5
6
FL Display
*2
SX-319V-K
6
7
Time (sec.) Description of Indications
5 (-> normal) *1
5 (-> normal) *1
usually
7
8
A
B
C
D
E
F
33
8