Advertisement
RINSE & HOLD Cycle
For rinsing
a few
items
to be
washed
one or more
days
later.
Cycle
time is about
12 minutes.
Use AIR DRY only
HEAT DRY or AIR DRY?
If the HEAT DRY Option
is selected,
air in the
dishwasher
is heated
during
the "dry"
part of
the cycle.
If the AIR DRY Option
is selected,
air in the
dishwasher
is not heated.
Using this option helps
save energy, but dishes ta ke longer to dry (over-
night]
and
some
water
spotting
may
result.
Some items (such as plastics)
may need towel
drying.
For best results, use a liquid rinse aid such as
Jet-Dry."
Changing a setting
You can change
a setting
anytime
during
any cycle.
1. Lift up on the door latch to unlatch
the door
and stop the cycle.
Don't open the door until
the spray arms stop spinning.
2. Turn the Cycle
Control Knob clockwise
to the
cycle
you want.
3. Be sure the detergent
dispensers
are filled
properly
for the new cycle.
4. Press door firmly to latch
it. The dishwasher
will automatically
start the new cycle.
To add a dish after starting
3. Open the door and add the dish.
4. Close the door. Do not latch
it. Wait 30 sec-
1. To be sure the added
item is washed
and
rinsed, make
sure the Cycle
Control
Knob
has not passed
LIGHT WASH.
3. Lift up on the door latch to unlatch
the door
and stop the cycle.
Don't open the door until
the spray arms stop spinning.
onds for air in the dishwasherto
warm up. This
helps
reduce
the amount
of moisture
that
can come
from the vent when restarting
the
cycle.
5. Press door firmly to latch
it. The dishwasher
will automatically
start where
it stopped.
Advertisement
