Proper Loading; Lop Rack Loading - Whirlpool DP6881XL Use & Care Manual

Proper loading
Always load dishes so soiled surfaces are reached by spray from rotating spray arms.
Water must be able to drain off completely for best drying results. Be careful to separate
items so spray can reach all surfaces.
Top rack loading
1
CUP AND GLASS LOAD
The top rack is designed for cups, glasses
and smaller items.
.
.
Place so open ends face down for clean-
ing and draining.
load glasses in top rack only. Bottom
rack is not designed for glasses Damage
may occur.
l
Place items in the rows between prongs.
Placing them over the prongs can lead
to breakage.
l
Be sure light items are held firmly in place.
l
China, crystal and other delicate
itemS
must not touch another item during dish-
washer operation. Damage may occur.
ADJUSTABLE TOP RACK
(ModelDP688lXLOnly)
The top rack does not have to be level.
7
LOWER
UTENSIL LOAD
l
Raise or lower one or both sides to help
fit tall items in the top or bottom rack.
l
Turn knob clockwise to raise a side.
l
Turn knob counterclockwise to lower a side
l
Load plastic items
only Tn ihe top rack.
Only plastic items marked "dishwasher
safe" are recommended.
l
Plastic items can be melted in the bottom
rack.
l
Small bowls, pans and other utensils
can be placed in the top rack.
l
Items with cooked-on or dried-on foods should be loaded in the bottom rack with
soiled surfaces facing the spray.