General Operation; Standby / On; Auto Standby; Selecting Modes - JVC XS-D629BM Instruction Manual

General Operation

Standby / ON

When you first connect the unit to the mains socket, the unit will be in Standby mode. The
SOURCE button will light up red.
To switch on the unit,
• Press SOURCE button on the unit, or
To switch off the unit,
• Press and hold
• Press button on the remote control.
SOURCE button will light up red. Disconnect the mains plug from the mains socket if
The
you want to switch the unit off completely.
The status indicator of the last used mode will light up after the unit is switched on.

Auto Standby

When there is no input signal (or weak input signal) for over 15 minutes, the unit will
automatically switch to Standby mode.

Selecting Modes

Press SOURCE button repeatedly on the unit, or BT/AUX/USB button on the remote
control to switch between BT/AUX IN/USB mode.

Adjusting the Speaker Level Settings and Effects

Adjusting the Volume
Press +/– on the unit or VOL+/VOL– on the remote control to increase/decrease the
•
volume.
• If you wish to turn the sound off, press
+/– on the unit or VOL+/VOL– on the remote control to resume normal listening.
Adjusting the Bass Volume Level
Turn BASS knob clockwise/anti-clockwise to adjust the bass level.
Adjusting the Treble Volume Level
Turn TREBLE knob clockwise/anti-clockwise to adjust the treble level.

AUX IN Operation

1. Before connecting to the mains socket, ensure all the connections are completed.
2. While in On mode, press
the remote control to select AUX IN mode.
3. Operate your audio device directly for playback features.
14
SOURCE button on the unit.
SOURCE button repeatedly on the unit, or AUX button on
button on the remote control.
on the remote control. Press again, or press