Maintenance; Daily Procedures; Weekly Procedures - CYBEX 19060 Owner's Manual

All preventive maintenance activities must be performed on a regular basis. Performing routine
preventive maintenance actions can aid in providing safe, trouble-free operation of all Cybex Strength
Systems equipment.
NOTE: Cybex is not responsible for performing regular inspection and maintenance actions for your
machines. Instruct all personnel in equipment inspection and maintenance actions and also
in accident reporting/recording. Cybex phone representatives are available to answer any
questions or concerns that you have.
CAUTION
Use only Cybex replacement
parts when servicing.
Failure to do so could result
in personal injury.
Cybex will void warranty if
non-Cybex replacement parts
are used.

Daily Procedures

1. Upholstery - Wipe down all upholstery.
2. Frames
- Wipe down all frames using a mild solution of warm water and car wash soap. Be sure
to dry thoroughly. AVOID acid or chlorine based cleaners and also cleaners containing abrasives
as these could scratch or damage the equipment.
3. Chrome - Clean chrome tubes, first using chrome polish and then using a car wax seal. Neutral
cleaners with a pH between 5.5 and 8.5 are recommended. Be sure to dry thoroughly. AVOID
acid or chlorine based cleaners and also cleaners containing abrasives as these could scratch or
damage the equipment.

Weekly Procedures

1. Inspect all nuts and bots for looseness. Tighten as required.
2. Inspect all labeling for readability. This includes instructional placards, warning and caution
decals. Replace all worn labeling immediately.
Cybex 19000/19010 Half Rack Owner's Manual

Maintenance

NOTE: All inspections
and repairs must be
performed by trained
service personnel only.
25