Cooking In More Than One Cook Cycle - Whirlpool SM958PES Use & Care Manual

I I
When the cooking time ends,
"End" will show 06 the Display
and 4 beeps will sound. (You
can stop the beeping by
opening the door or by touch-
ing CANCEL.) "End" will remain
on the Display and a reminder
tone will sound every 60 sec-
onds (to remind you that food
is left in the oven] until the door
is opened or CANCEL is
touched. The Display will then
show the time of day.
Changing the Cook Power
The Cook Power can be changed any time before or after touching START:
l
Touch COOK POWER.
l
Touch a Number Pad for the new Cook Power.
l
Touch START. The cycle will cook at the new Cook Power for the original time.
OR...
l
Touch COOK POWER twice if you want to change a lower Cook Power
to HIGH.
l
Touch START.
Cooking in More Than One Cook Cycle
For best results, some recipes call for one Cook Power for a certain length of
time, and another Cook Power for another length of time. Your oven can be set
to change from one to another automatically.
DO THIS... THIS HAPPENS...
1.
Put food in ihe oven
and close the door.
q
.a
2.
Touch COOK 1.
The COOK 1 Indicator
Light will come on and the
Display will show four 0's.
The Display will show the
numbers you touched in
the order you touched
them. This example shows
3 minutes, 25 seconds.