Cooking With More Than One Cook Cycle; Using Auto Defrost - Whirlpool GT4185SKQ2 Use & Care Manual

Table of Contents

Advertisement

NAME
WHEN TO USE IT
P50 = 50°/o of full power
Medium
• Cooking ham, whole poultry, and pot roasts
P40 = 40% of full power
• Melting chocolate
• Heating bread, rolls and pastries
P30-DEF = 30% of full
Medium-Low,
• Defrosting foods, such as bread, fish, meats,
power
Defrost
poultry, and precooked foods
P20 = 20% of full power
• Softening butter, cheese, and ice cream
P10-WRM = 10% of full
Low
• Keeping food warm
power
• Taking chill out of fruit
For best results, some recipes call for one cook power
for a certain length of time, and another cook power for
another length of time. Your oven can be set to change
from one power level to another automatically, for up to
3 cycles plus a defrost cycle.
1. Put your food in the oven and close the
door.
4. Repeat Steps
2 and 3 to set the cooking
time and cook power for each additional
cycle.
You can defrost food by choosing a category and
setting a weight. AUTO DEFROST has preset times and
cook powers for 3 categories: Meat, Poultry, and Fish.
1. Touch AUTO
DEFROST.
Touch once for Meat, twice for Poultry and 3 for
Fish.
2. Touch number pads for desired weight
(from .1 to 6.0 Ibs [45 g to 2.7 kg]).
3. Touch START.
During defrosting,
5 tones will sound.
These tones tell you when to check,
turn over, separate,
or rearrange
the
food.
To start the oven again, touch
START.
5. Touch START.
After the first cycle is complete, 2 tones sound and
the next cycle(s) will count down.
6. At the end of the cooking
time:
Display will show "END" and 3 tones will sound.
NOTE: You can set your chosen cook functions in
any order. However, when you use AUTO DEFROST,
it must be the first cycle.
.
At the end of the defrosting
time:
Display will show "END" and 3 tones will sound.
14

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents