Dimplex DCACP30DC Instruction Manual page 11

Operation
LEFT / RIGHT OSCILLATION
• When the unit is ON press the LEFT/RIGHT button on either the control panel or
remote control to begin oscillation. The LED indicator will illuminate accordingly
and the unit will begin to move left to right within 80°.
NOTE: When the fan is first plugged in, it will oscillate 30° to calibrate the setting.
(left at 30° with a 9 second pause, followed by turning right to 80° and pausing for
15 seconds). If for some reason the oscillation angle is less than 30° or 80° then the
fan needs to complete the above process, so it can work normally.
• Press the LEFT/RIGHT button again to cancel the oscillation function.
UP / DOWN OSCILLATION
When the unit is ON press the UP/DOWN button on either the control panel or
remote control to begin oscillation. The LED indicator will illuminate accordingly and
the unit will begin to move Up and Down within 80°.
NOTE: Both LEFT/RIGHT & UP/DOWN oscillation directions can be used at the
same time. This will activate a 3D-like oscillation movement.
11