Table of Contents
Advertisement
Using Your Cooktop
Contmued
Using the vent system
Using the cooktop's built-in downdraft vent fan
removes cooking vapors, odor and smoke.
The fan will automatically
operate at HIGH
speed when the grill module is in use. The fan
cannot be manually turned off when the grill
module is operating.
When using surface units, turn the Vent Fan
Control Knob clockwise to HIGH or LOW. Use
HIGH only when doing cooking that produces
significant cooking vapors, odor and smoke. You
will hear a click when the fan comes on. Turn
counterclockwise
to turn the fan OFF.
The fan filters must be in place for the fan to
operate properly.
Personal
Injury Hazard
Do not put hands in vent box when fan or
controls
are on. The vent fan system turns
on automatically
when the grill is used.
Turn fan and cooktop
controls
to OFF.
Failure to do so could result in personal
injury.
Changing the cooktop
modules
The cooktop modules will work on both sides of
the cooktop. (See page 17 for grill removal
instructions and page 11 for optional griddle
installation instructions.)
Burn and Electrical
Shock Hazard
Be sure all controls
are off and the mod-
ules are cool before handling
modules.
Failure to do so could result in burns or
electrical
shock.
To remove coil element,
solid element
and
ceramic
glass modules:
Terminal
Receptacle,
-.,~
/
A+,,/
1.
Lift module slightly by the handle.
2. Pull module toward you with both hands to
unplug it.
3. Lift module out of cooktop.
To replace
modules:
1. Line up module terminal with cooktop recep-
tacle.
2. Push terminal into receptacle
until it is plugged
in.
3. Use the handle to lower the front of the
module.
10
Advertisement
Table of Contents
