LG 32LY760H Owner's Manual page 33

21. Channel Add/Del (Command: m b)
To add and delete the channels.
Transmission [m][b][ ][Set ID][ ][Data][Cr]
Data 00: Channel Delete Data 01: Channel Add
Acknowledgement [b][ ][Set ID][ ][OK/NG][Data][x]
22. Key (Command: m c)
To send IR remote key code.
Transmission [m][c][ ][Set ID][ ][Data][Cr]
Data Key Code - See p. 24
Acknowledgement [c][ ][Set ID][ ][OK/NG][Data]
[x]
When TV is in the standby mode, TV will turn
on by POWER button of remote control only.
23. Backlight (Command: m g)
To adjust screen backlight.
Transmission [m][g][ ][Set ID][ ][Data][Cr]
Data Min:00 ~ Max:64 (*transmit by
Hexadecimal code)
*Refer to Real data mapping.
Acknowledgement [g][ ][Set ID][ ][OK/NG][Data]
[x]
24. Equalize (Command: j v)
To adjust equalize.
Transmission [j][v][ ][Set ID][ ][Data][Cr]
MSB
0 0 0 0 0
Frequency
7 6 5 Frequency 4
0 0 0 1st Band 0
0 0 1 2nd Band 0
0 1 0 3rd Band ... ... ... ... ...
0 1 1 4th Band 1
1 0 0 5th Band 1
LSB
0 0 0
Data
3 2 1 0 Step
0 0 0 0 0(decimal)
0 0 0 1 1(decimal)
...
0 0 1 1 19(decimal)
0 1 0 0 20(decimal)
EXTERNAL CONTROL DEVICE SETUP
Acknowledgement [v][ ][Set ID][ ][OK/NG][Data][x]
Example) To specify the value of the 5th band
(10 kHz) as +5:
To specify the value of the 5th band as +5,
100 in binary, which falls in 7th, 6th and
5th bit, is necessary. To calculate the value,
take 0, with the minimum value of -10, as a
base. Then the value for +5 is 15 that equals
01111 in binary. To consolidate these values
and send it as a command, first, put the two
binary digits together: 10001111. This equals
8F in hexadecimal. Enter jv 00 8F to use as a
command.
33