Adcom GTP-760 Owner's Manual page 22

30 Source Selectors (main, DVD, VCR, tuner, v. aux, CD, dig.1, dig.2.)
These buttons serve two functions.
• First, they switch inputs on the GTP-760 so you can hear the source you've just selected.
• Second (and even more important), they can change the functions of all the other buttons on the
remote controller . In other words, if you first push the DVD device selector, the remote's select/play
button generates a command code for your DVD player. If you then press the dig.2 device selector,
the same select/play button would send a different command code that might, for example, start
your mini-disc player. (Of course, this all depends on how you programmed the remote in the first
place. Don't worry-we'll cover that shortly.)
31 Power
• In main mode (after you've pressed the main device selector), this is preprogrammed to turn the
GTP-760 on and off.
• In tuner mode, it is also preprogrammed to turn the GTP-760 on and off.
• The button is programmable for use with other sources.
32 Input Selectors (tape, LD)
• In main mode, these are similar to the source selectors described above but they switch only
GTP-760 inputs. They DO NOT automatically change the functions of other remote buttons.
• These buttons are programmable for use with other sources.
33 Volume Up/Down
• These are the only buttons preprogrammed at the factory with the same command.
In all modes, these buttons change the master volume setting of the GTP-760.
34 Tuning Up/Down
• In tuner mode, these buttons are preprogrammed to scan up or down the GTP-760's AM or FM band.
• They are programmable for use with other sources.
35 Guide
• This is intended for easy call-up of cable or satellite program guides.
• Button is programmable for use with any source.
• In CD mode, it is preprogrammed for audible reverse scan with an ADCOM CD player
36 Menu
• In main mode, this is preprogrammed to call up the GTP-760's SETUP menu system.
(A subsequent push will exit the menu, regardless of which menu screen you are in.)
• It is programmable for use with any source.
• In CD mode, it is preprogrammed for audible forward scan with an ADCOM CD player
37 < (left arrow)
• In main mode, this is preprogrammed to step through the various choices you might wish to select
while a menu item is highlighted.
• In CD mode, it is preprogrammed for audible reverse scan with an ADCOM CD player
• The button is programmable for use with any other source.
38 Up arrow/Pause
• In main mode, this is preprogrammed to scroll up to the next choice on a menu screen.
• In CD mode, it is preprogrammed to pause an ADCOM CD player.
• In tuner mode, it is preprogrammed to start scanning preset frequencies higher than the
current station.
• The button is programmable for use with any other source.
39 > (right arrow)
• In main mode, this is preprogrammed to step through the various choices you might wish to select
while a menu item is highlighted.
• In CD mode, it is preprogrammed for audible forward scan with an ADCOM CD player
• The button is programmable for use with any other source.
21