Fishman AURA SPECTRUM DI User Manual page 23

an 'E' played very flat an 'A#' played in-tune a 'B' played slightly sharp
T uner Option
When shipped from the factory, the audio output is muted when the tuner
is engaged.
Alternately, you have the option to use the tuner without muting your out-
put. To choose this option, hold the footswitch down until the Aura LED
flashes. Repeat to return to the factory state.
Bypass mode
Aura Spectrum allows you completely bypass the Image, EQ, and Com-
pressor processing. To enter bypass mode, press both the anti-feed-
back and tuner switches together. The white Aura LED will alternate
slowly with the tuner LED to indicate bypass mode is active. To exit
bypass mode, press both foot switches again.
With bypass active, all controls including the tuner are functional,
however you will not hear any of the changes until you exit bypass.
23