Changing The Trailing Code; Changing The Receive Timeout; Cold Start - Toshiba V Series User Manual

5.3 Changing the Trailing Code

An example of changing the transmission text trailing code is shown below:
［ Trailing code modification example ］
12W （ Trailing code ）
5W （ Soft reset ）

5.4 Changing the Receive Timeout

An example of changing the receive timeout interval is shown below:
［ Receiving timeout modification example ］
13W （ receive timeout ）
5W （ Soft reset ）

5.5 Cold Start

Performa a cold start to reset the CIF module by software. When cold start is
performed, the trailing code and the receive timeout interval are restored to default
values (Trailing code : CR (0DH), receive timeout : 1 sec. (10)).
Cold start takes 2 seconds to complete.
［ Cold start example ］
5W （ Soft reset ）
6F8C0843
5.3 Changing the Trailing Code
0003H （ Trailing code 03H ）
80FEH （ Hot start ）
20 （ Receive timeout 2 sec. ）
80FEH （ Hot start ）
80FFH （ Cold start ）
5
19