Chevrolet Impala 2007 Getting To Know Manual page 12

Getting to Know Your Impala
12
To Set Speed Compensated Volume:
1. Set the radio volume to the desired
level.
2. Press the MENU button to display
the radio setup menu.
3. Press the pushbutton below the auto
volume label on the radio display.
4. Press the pushbutton under the
desired setting (Off, Low, Medium
or High) to select the level of
compensation. For the Bose system,
the settings are On and Off.
5. The compensation will be set once
the display times out after 10
seconds.
Setting the Time
To Set the Time (without Date
Display):
1. Press the (Clock) button until the
hour numbers begin flashing on the
radio display. Press the button again
to adjust the minute numbers.
2. With either the hour or minute
numbers flashing, use the
knob to select the time.
3. Press the Clock button again to set
the currently displayed time.
To Set the Time (with Date Display,
if equipped):
1. Turn on the radio.
2. Press the (Clock) button. Or,
if equipped, press the MENU
button until the clock option is
displayed; and then press the
pushbutton located under the clock
option label. The HR, MIN, MM, DD,
YYYY labels will appear on the
display.
3. Press the pushbutton under any of
the labels to be changed.
4. Press the pushbutton again or the
FWD button to increase the numbers.
Press the REV button to decrease
the numbers. Rotating the
knob also will increase or decrease
the selected label.
5. Press the Clock or MENU button
again to set the currently displayed
time and date.
MP3 Capability (if equipped)
If your AM/FM stereo with CD has MP3
playing capability, a CD-R or CD-RW
containing MP3 audio tracks will play
automatically when inserted into the
CD player. An MP3 symbol will be
displayed.
Portable Audio Player
A portable audio player can be connect-
ed to the auxiliary input jack located on
the radio. When connected, the radio
automatically begins playing audio from
the player over the vehicle speakers.
Radio Data System (if equipped)
(Tune)
When you tune to a Radio Data System
(RDS) station, the station name and call
letters will appear on the display instead
of the frequency. RDS stations may also
provide the time of day, a program type
for current programming and the name
of the program being broadcast.
RDS features are available for use only
on FM stations that broadcast RDS
information. RDS relies on receiving
specific information from these stations
and will work only when the information
is available.
See Section 3 of your Owner Manual.
(Tune)