Steps 1 and 2 are to be done
outside the computer chassis.
The drive rails are not specific
to the left or right side of the
diskette drive and can be
installed on either side of the
drive.
R
D
D
EPLACING A
ISKETTE
RIVE
VI. Replacing the Diskette Drive
To replace the Diskette Drive, complete the following
procedure:
Note: Save all the packing materials received with your replacement card.
You will need them to return the defective part.
1. Attach the drive rails that were removed from the
defective drive to the replacement drive (see Figure 6-1).
2. Insert the replacement drive into the front of the computer
in the same location from which the defective drive was
removed. Slide the drive in until it snaps into place
(see Figure 6-2).
Figure 6-1
Figure 6-2
13