Summary of Contents for Milwaukee M18 FUEL SUPER HAWG M18FRAD2-0
Page 1
OPERATOR'S MANUAL Cat. No. M18FRAD2-0 M18 FUEL™ SUPER HAWG™ RIGHT ANGLE DRILLS WARNING To reduce the risk of injury, user must read and understand operator's manual.
GENERAL POWER TOOL • Do not overreach. Keep proper footing and balance at all times. This enables better control SAFETY WARNINGS of the power tool in unexpected situations. Read all safety warnings, instruc- WARNING • Dress properly. Do not wear loose clothing or jewelry.
2. 1/2" Keyed chuck • Maintain labels and nameplates. These carry 7. Control switch 3. LED important information. If unreadable or missing, 4. Chuck key storage contact a MILWAUKEE service facility for a ® replacement. ASSEMBLY • Some dust created by power sanding,...
Bit Selection • Keep selfeed bits aligned with the work surface so • Use sharp bits. Sharp bits are less likely to bind bits go in straight (see "Drilling"). when drilling. • Avoid drilling warped, wet, knotty, and/or pitchy • Use the proper bit for the job. There are many material if possible.
Page 5
Drilling If the bit binds, the motor housing braced against the stud will hold the drill in position. 1. Before drilling, be sure the workpiece is clamped securely. A poorly secured piece of material may result in personal injury or inaccurate drilling. Use backing material to prevent damage to the work- piece during breakthrough.
Return the tool, battery pack, and charger to a MILWAUKEE service facility for ® repair. After six months to one year, depending on...
Page 8
SERVICE - AUSTRALIA and NEW ZEALAND MILWAUKEE ® prides itself in producing a premium quality product that is Nothing But Heavy Duty ® . Your satisfaction with our products is very important to us! If you encounter any problems with the operation of this tool, please contact your authorised MILWAUKEE ®...