Compliance Requirements - Husqvarna Automower Connect 4G Operator's Manual

6.1 Compliance requirements

FCC ID: XPYUBX18ZO01 (Automower
2G/4G)
The device complies with part 15 of the FCC Rules.
Operation is subjected to the following 2 conditions:
1. This device may not cause harmful interference.
2. This device must accept any interference received,
including interference that may cause undesired
operation.
WARNING:
exposure requirements, please maintain a
separation distance of at least 20 cm / 7
inches from any part of the product.
Models with a hatch: The supplied label shall be
attached to the product according to figure below.
Husqvarna
Automower
This device contains the module
FCC ID: XPY1CGM5NNN
Models without a hatch: The supplied label shall be
attached to the product according to figure below
Husqvarna
This device contains the module
FCC ID: XPY1CGM5NNN
4 - Applicable to US/CA market
6 Applicable to US/CA market
®
Connect
To comply with RF
® Connect
Automower ® Connect
1438 - 003 - 08.09.2020