9.5 Display memory information
You can check the memory or Micro-SD capability and the
remaining memory of this device by using this function. See
the following picture:
Memory capacity
Remain. memory
9.6 Format device
You can choose to format internal memory by using this
function. See the below picture:
46
EN
9.7 Firmware version
You can check the device's firmware version by using this
function.
9.8 Set date & time
See the System Time setting interface as follows:
Set time format
Set date
Set time
On this interface, you can set the current system time and
display format. Press STOP return to the previous level
submenu.
For example: select "Time Format" to show the following
menu:
12 hours
-
24-hours
There are 2 time formats to choose, namely 12-hour format
and 24-hour format. The system default is 24-hour format.
Choose "Set data", the following interface will pop up: