Advertisement
01/09/2020
Connector panel
Ethernet ports (2)
Digital audio IN (optical)
AC power (mains) input
IR repeater
https://www.sonos.com/support/en-us/sonos-user-guide/index.html#t=sonos-user-guide%2Fplaybar%2Fplaybar.htm
IR sensor light
Use the supplied Ethernet cable if you want to
connect to a router, computer, or network-attached
storage (NAS) device (optional).
Use an audio optical cable to connect the Playbar
to your TV.
Use only the supplied power cord (using a third-
party power cord will void your warranty).
Note: Insert the power cord firmly until it is flush
Allows the commands from your remote control to
reach your TV if the Playbar is positioned in front
of the TV.
This setting is on by default, but can be turned off
in the room's settings.
playbar
If the light is distracting, you can turn it off in
your room's settings.
The IR (InfraRed) sensor receives signals sent by
a remote control.
When the Playbar receives a volume or mute
command, the IR light displays momentarily. Y ou
can adjust this setting so the light never displays
in the room's settings.
with the speaker.
2/4
Advertisement
