Special Accessories; Maintenance And Repairs - Stihl BT 130 Instruction Manual

Spark plug (resistor
type): NGK CMR 6H
Electrode gap: 0.5 mm
This ignition system meets all
requirements of the Canadian
Interference-Causing Equipment
Regulations ICES-002.
Fuel System
All position diaphragm carburetor with
integral fuel pump
Fuel tank capacity: 530 cc (0.53 l)
Drilling gear
Two-stage spur gear drive
Gear ratio: 47.5:1
Max. spindle speed: 200 rpm
Max. torque at drilling
spindle: 81 Nm
Lubrication: STIHL gear
lubricant for
brushcutters
Weight
Dry, without drilling tool
(auger): 9.9 kg
Dimensions
Length with handle
frame: 400 mm
Width with handle frame: 530 mm
Height without drilling
tool (auger): 365 mm
BT 130

Special Accessories

Earth augers
Diameter: 40, 60, 90, 120,
150, 200 mm
Length: 695 mm
Planting auger
Diameter: 150 mm
Length: 525 mm
Planting hole auger
Diameter: 260 mm
Length: 660 mm
Other special accessories
Shaft extension: 250, 450 mm
Chuck for spiral drills: Diameters up to
13 mm
Contact your STIHL dealer for more
information on these and other special
accessories.

Maintenance and Repairs

Users of this machine may only carry out
the maintenance and service work
described in this user manual. All other
repairs must be carried out by a
servicing dealer.
STIHL recommends that you have
servicing and repair work carried out
exclusively by an authorized STIHL
servicing dealer. STIHL dealers are
regularly given the opportunity to attend
training courses and are supplied with
the necessary technical information.
When repairing the machine, only use
replacement parts which have been
approved by STIHL for this power tool or
are technically identical. Only use high-
quality replacement parts in order to
avoid the risk of accidents and damage
to the machine.
STIHL recommends the use of original
STIHL replacement parts.
Original STIHL parts can be identified by
the STIHL part number, the {
logo and the STIHL parts symbol K
(the symbol may appear alone on small
parts).
English
23