Sewing Machine With Direct Drive - DURKOPP ADLER 887 Service Instructions Manual

1.2.2

Sewing machine with direct drive

3
–
Unscrew three fixing screws on the hand wheel (5) and remove it.
–
Put the needle in the upper dead point and insert the setting pin
(2), which is a part of the sewing machine accessories and which is
fixed on the oil tray bottom side, into the crank head.
–
Loosen two setting screws of the hand wheel flange (4) with the
Allen key 3 mm (1).
–
Turn the hand wheel flange with the hollow (6) against the sign (3).
–
Tighten both setting screws with the key (1) and fix the hand wheel
on again.
7
6 2 4
1
5
EN