Connections Diagram - Adcom GFA-7605 Owner's Manual

current phase angle or the reactance of the loudspeakers
which the amplifier is driving. Sometimes, when the
amplifier is in use, the LEDs may occasionally flicker
during high volume listening, particularly if you are driving
low impedances. This flickering is no cause for concern.
The LEDs are simply warning you that the amplifier is
approaching its maximum power output into the particular
loudspeakers you are using. If, however, the Distortion
Alert LEDs glow brightly or are illuminated most of the
time during playback, you are over driving the amplifier
and should turn down your volume control to reduce
the listening level, otherwise it may cause the Thermal
Protection to be activated or, in extreme cases, damage
your loudspeakers.
Right Back
Right Surround
WARNING
WHENEVER CONNECTIONS TO OR FROM
THE GFA-7605 & GFA-7607 ARE BEING
MADE, BE CERTAIN THAT THE AC ON/OFF
SWITCH OF THE AMPLIFIER IS IN THE
OFF POSITION, THE AC CORD OF THE
AMPLIFIER IS DISCONNECTED FROM THE AC
WALL OUTLET AND THAT ALL ASSOCIATED
COMPONENTS ARE OFF.
Left Front
Right Front
Center
Left Surround
Left Back