Pre-Setting; Configuring Network Settings; [Tcp/Ip]; [Ipv4] - Konica Minolta AU-211P User Manual

2.3

Pre-Setting

2.3 Pre-Setting
To use this system, pre-configure the following settings on the MFP.
- Configuring Network Settings (p. 2-4)
- Registering Active Directory for Authentication (p. 2-6)
- Adjusting the MFP Time (p. 2-6)
- Registering the DNS Server Associated with Active Directory (p. 2-7)
- Setting PIV Transitional Mode (p. 2-7)
-
Configuring Settings for Verifying the Active Directory Certificate (p. 2-8)
-
Setting the Power Saving Mode (p. 2-9)
2.3.1

Configuring Network Settings

Configure the basic settings required to use the MFP in network environment.

[TCP/IP]

Select [Utility] - [Administrator] - [Network] - [TCP/IP Setting] - [TCP/IP Setting1], and set [TCP/IP] to ON
(default: ON).

[IPv4]

Select [Utility] - [Administrator] - [Network] - [TCP/IP Setting] - [TCP/IP Setting1] - [IPv4], and configure the
following settings.
Item
[IP Address Setting Method]
[IP Address]
[Subnet Mask]
[Default Gateway]

[IPv6]

Select [Utility] - [Administrator] - [Network] - [TCP/IP Setting] - [TCP/IP Setting1] - [IPv6], and configure the
following settings.
Item
[IPv6]
[Auto IPv6 Setting]
[DHCPv6 Setting]
[Link-Local Address]
[Global Address]
[Prefix Length]
[Gateway Address]
AU-211P
Description
Select the method to specify the IP address of the MFP depending on
your environment (default: [Auto Setting]). To manually specify the IP ad-
dress, select [Manual Setting]. To automatically specify the IP address
using DHCP, select [Auto Setting], and specify the automatic setting
method.
Enter the fixed IP address assigned to the MFP when manually configur-
ing the setting.
Enter the subnet mask when manually configuring the setting.
When directly entering the IP address, specify the default gateway of the
network to be connected.
Description
When using IPv6, set this option to ON (default: ON).
When automatically specifying the IPv6 global address, set this option to
ON (default: ON). The IPv6 global address is automatically set based on
the prefix length notified from the router and the MAC address of the
MFP.
When automatically specifying the IPv6 global address using DHCPv6,
set this option to ON (default: ON).
Displays the link-local address. The link-local address is automatically
specified from the MAC address of the MFP.
Enter the IPv6 global address when manually configuring the setting.
Enter the prefix length of the IPv6 global address between 1 and 128
when manually configuring the setting.
Enter the gateway address when manually configuring the setting.
2
2-4