Timer Function Setting (Weekly Timer/Auto Off Timer/Simple Timer) - Mitsubishi Electric PAR-21MAA Manual

4.3.2 Timer function setting (Weekly timer/Auto off timer/Simple timer)

The following settings can be made.
1 Weekly Timer (default): The weekly timer can be used.
2 Auto Off Timer
3 Simple Timer
4 Timer Mode Off
* If the clock function is disabled (OFF), "Weekly Timer" cannot be selected.
I Clock function setting
The following settings can be made.
1 ON (default) : The clock function can be used.
2 OFF
: The clock function cannot be used.
* If "OFF" is selected to disable the clock function, the weekly timer cannot be used to make day of the week/time settings.
To use the weekly timer to set the day of the week and time, the clock function must be set to "ON" (default).
To Use the Clock
(1) While pressing the
MODE
selection mode.
(2) Press the button until
MODE
CHANGE
[Display A]
LANGUAGE
(3) Press the
MENU
(4) Press the
ON/OFF
[Display D]
(5) While pressing the
MODE
* If you press the
ON/OFF
I Day of the week and time setting
G The day of the week and time can be set and changed.
[The time can be set in 1-minute increments.]
Notes
• This setting is not possible if the clock function is disabled by the function setting.
• The day of the week and time are not displayed if the clock function is disabled by function selection.
• This setting is not possible if the simple timer or auto off timer has been selected.
: The auto off timer can be used.
: The simple timer can be used.
: Timer mode cannot be used.
I Display example
A
D
(1) (5)
(2)
(3)
(4)
button, press the
MODE
appears on the screen (at A).
SELECTION
FUNCTION
SELECTION
button to select "CLOCK" on the screen (at A).
button so that "ON" appears on the screen (at D).
button, press the
button before the
button for two seconds to activate the remote controller's function
ON/OFF
MODE
SELECTION
button for two seconds to return to normal mode.
ON/OFF
button, the settings you have made will be cancelled.
MODE
DISP MODE
SETTING
23