Auto Mode Setting - Mitsubishi Electric PAR-21MAA Manual

4.2.2 Auto Mode Setting

The following settings can be made.
1 ON (default) : Auto mode is displayed when selecting an operation mode only if the unit to be connected is supported by the auto
mode.
However, this does not apply if the unit to be connected is not supported by the auto mode.
Operation mode can be switched from one to another:
COOL
2 OFF
: Even if the unit is supported by the auto mode, auto mode is not displayed when selecting an operation mode.
Operation mode can be switched from one to another:
COOL
How to Set Auto Mode
(1) While pressing the
MODE
selection mode.
(2) Press the button to select
MODE
CHANGE
[Display A]
LANGUAGE
(3) Press the
MENU
* The current setting is displayed.
(4) Press the
ON/OFF
SELECT
[Display D]
AUTO MODE
(5) While pressing the
MODE
complete.
* If you press the
ON/OFF
18
DRY FAN
DRY FAN
I Display example
A
D
(1) (5)
(2)
(3)
(4)
button, press the
FUNCTION on the screen (at A).
SELECTION
FUNCTION
SELECTION
SELECT
appears on the screen (at A).
button so that
AUTO MODE
button to select whether auto mode is to be used (on) or not (off).
SELECT
AUTO MODE
button, press the
button before the
HEAT AUTO
HEAT
button for two seconds to activate the remote controller's function
ON/OFF
MODE
SELECTION
button for two seconds to return to normal mode. Setting is now
ON/OFF
button, the settings you have made will be cancelled.
MODE
DISP MODE
SETTING