Table of Contents
Advertisement
3. Under <This connection uses the following items> select <Internet Protocol (TCP/IP)> and click
on <Properties>:
4. Activate the radio button <Use the following IP address> and make the following settings:
IP address:
Subnet mask:
Default gateway:
5. Close all dialog boxes by pressing on <OK>.
ScanIR3
192.168.42.x
where x is an address between 0 and 255 except 30 which is already
used by the linescanner by factory default
255.255.255.0
{empty}
Rev. A1 Mar 2015
Installation
29
Advertisement
Table of Contents
