Table of Contents
Advertisement
Before Using For The First Time
1. Carefully unpack your Toaster and
remove all packaging materials. Remove
any labels from the outer stainless steel
surfaces.
2. To remove any dust that may have
accumulated during packaging, simply
wipe the Toaster exterior with a clean,
damp cloth.
3. Do not use abrasive cleansers.
4. Do not put the Toaster, cord or plug in
water.
5. Before making toast for the first time,
operate both pairs of the Toasting Slots
without bread and with both Browning
Selectors set at the maximum setting.
This will help to burn off any dust etc.
which may have accumulated on the
elements. The new elements may give
off an unpleasant smell but this should
not be a cause for alarm. Make sure the
room is well ventilated while doing this.
Lights
Buttons
5
OPERATING INSTRUCTIONS
Control Panel
To Operate Toaster
1. Position the Toaster on a firm, level,
heat-resistant surface, clear of curtains,
draperies, and other combustible
materials.
WARNING: Do not place the Toaster on or
near items that may become
damaged even by moderate
sources of heat.
2. Unwrap power cord from Cord Storage
Wrap on the underside of the Toaster.
3. Plug the power cord into a 120V AC
electrical outlet.
Advertisement
Table of Contents
