Connecting Your Loudspeakers - Definitive Technology DEMAND Series Owner's Manual

Connecting Your Loudspeakers

STRIP 1/4" (6MM) WIRE
1. UNSCREW A SET OF BINDING POSTS AND INSERT
THE BARE WIRE INTO THE CENTER HOLE
2. TIGHTEN UNTIL SECURE
1. IDENTIFY MARKINGS ON WIRE AND ASSIGN +/–
2. APPLY BANANA PLUGS OR SPADES AT THIS POINT
IF APPLICABLE
ENSURE PROPER POLARITY BETWEEN THE AMPLIFIER
AND SPEAKER BY CONNECTING + TO + AND - TO -
TERMINALS
Receiver/Amplifier
EN-10