Connecting Your Loudspeakers - Definitive Technology DEMAND SERIES Owner's Manual

Connecting Your Loudspeakers

STRIP 1/4" (6MM) WIRE
1. UNSCREW A SET OF BINDING POST
AND CONNECT WIRE
2. TIGHTEN UNTIL SECURE
8
1. IDENTIFY MARKINGS ON WIRE AND ASSIGN +/–
2. APPLY BANANA PLUGS OR SPADES AT THIS POINT IF APPLICABLE
ENSURE THAT THE SPEAKER IS ALWAYS
CONNECTED TO THE RECEIVER OR AMPLIFIER +
TO + AND – TO –
Figure 3 | Wiring and Polarity
+ – + –
+ –