Table of Contents
Advertisement
OPERATING INSTRUCTIONS
HOW TO REMOVE BLADES
CAUTION: Always unplug Electric Knife before removing
Blades. Blades are sharp; handle carefully. Always hold the
Blades with the serrated edges away from you.
1. Unplug from electrical outlet.
2. Grasp top of the Knife Blades, making sure serrated edges are fac-
ing away from you, and press the Blade EJECT Button.
3. Then carefully pull the Blades from the Handle.
USER MAINTENANCE INSTRUCTIONS
This appliance is permanently lubricated and will not require additional
lubrication for the life of the unit. It contains no user serviceable parts.
Any servicing requiring disassembly must be performed by a qualified
appliance repair technician.
While using, untwist cord from time to time to avoid tangling.
CARE AND CLEANING
CAUTION: Do not immerse Power Handle, Cord, or Plug in
water or any other liquid.
1. Unplug unit. Remove Blades from the Power Handle before washing.
Separate Blades by sliding the Rivet of one Blade out of the Slot of
the other Blade.
WARNING! Blades are sharp. Handle carefully. Always han-
dle Blades with hand away from cutting edge. Always store
Blades with cutting edge away from you.
2. Wash the Blades in warm, soapy water. Blades may also be washed
in a dishwasher. Rinse and dry thoroughly. Carefully slide the
Protective Sleeve onto the Knife Blades.
3. Use a soft, slightly damp cloth to wipe Handle surface. Do not allow
water or any other liquid to get into the Handle.
STORAGE
Unplug appliance, and store in its box or in a clean, dry place. Store
Knife Blades in the Protective Cover. Never wrap the Cord tightly
around the appliance. Do not put any stress on the Cord where it enters
the unit, as it could cause the Cord to fray and break.
(Cont.)
7
Advertisement
Table of Contents
