Table of Contents
Advertisement
5
Installation > Paper Deck Double Deeding Detection Kit-A1 Installation Procedure > Installing the Double Feeding Sensor Unit
13
13) Open the two clamps.
15
15) Connect the 4-pin connector (transmission side) of the double feeding sensor harness to the sup-
plied double feeding sensor (transmission/FG3-4283).
5
Installation > Paper Deck Double Deeding Detection Kit-A1 Installation Procedure > Installing the Double Feeding Sensor Unit
14
14) Thread the 4-pin connector (transmission side) of the double feeding sensor harness through the
clamps, and then close the clamps.
F-5-105
16
16) Install the double feeding sensor (transmission/FG3-4283) using the supplied screw (w/washer
screw, white, M3 x 8).
x1
F-5-107
41
F-5-106
F-5-108
41
Advertisement
Table of Contents
