Canon Paper Deck-AF1 Service Manual page 115

5
Installation > Installation Procedure > Checking and Adjusting the Tilt
4
4) If the paper deck is tilted to the right, make adjustments by tightening the right front caster or loosening the right rear caster after loosening the upper nut.
MEMO:
If the step size is about 2 mm, loosen or tighten the caster to change its height by about 4 mm to flatten out the step.
6
6) Secure the wrench at the original position.
5 Installation > Installation Procedure > Checking and Adjusting the Tilt
x1
F-5-53 F-5-53
5
5) Tighten the upper nut.
F-5-51 F-5-51
21
F-5-52 F-5-52
21