Table of Contents
Advertisement
Figure 1–3
2. Slip the long bracket over the end of the short bracket/slide assembly, with the
lip on the short bracket/slide assembly facing out (Figure 1–4).
Figure 1–4
3. Measure the distance between the lip on the long bracket and the end of the
short bracket/slide assembly and extend the two brackets until the distance
between the ends of the two brackets equals the distance between the side rails
on your rack.
Netra 150 Server Product Note ♦ Revision A, February 1997
6
Positioning the Bracket Assembly in the Rack
Mounting the Long Bracket on the Short Bracket/Slide Assembly
Advertisement
Table of Contents
