Selecting The Destination - Sony KDL-32EX655 Service Training Manual

SELECTING THE DESTINATION

The correct destination needs to be selected after replacing the Main Board.
CAUTION: Selecting the incorrect destination may require replacing the
Main Board.
Verify before proceeding to the next step:
; Updated the Software
; Selected the Segment Code
1. Take the TV out of deep Standby mode by pressing
turn on the TV.
POWER
2. Press to turn the TV back off.
3. Access Service Mode by pressing the following buttons on the
Remote Commander within a second of each other:
DISPLAY
Channel
2
to move to the next category until 002 MODEL category
4. Press
displays.
1
5. Press to move to the next item until 001 DEST item displays.
DIGITAL
002 MODEL
001 DEST
6. Using the table, press
decrease the data value, to select the correct destination of the
7. TV.
KDL-32EX655/40EX655/46EX655
SECTION 5 - UPDATES AND ADJUSTMENTS
Model Name Code Name Data Value
KDL-
KDL-
KDL-
POWER
5 + POWER
Volume
SERVICE
ISDB-LTN_BASE
3
to increase the data value or
Model Name Destination
-2A_BASE KDL-32EX655
-2A_BASE KDL-40EX655
-2A_BASE KDL-46EX655
CAUTION: Verify the DESTINATION is set correctly before proceeding.
If the incorrect destination Data Value is selected, it may corrupt
the software requiring a Main Board replacement.
to
8. Press
DIGITAL
002 MODEL
001 DEST
When complete, the screen briefly indicates the process is Done.
DIGITAL
002 MODEL
001 DEST
9. Proceed to
6
to
Data Value
BRZ ISDB-LTN_BASE
BRZ ISDB-LTN_BASE
BRZ ISDB-LTN_BASE
0
MUTING
then to WRITE (Save) the changes.
SERVICE
ISDB-LTN_BASE
WRITE
SERVICE
ISDB-LTN_BASE
DONE
"Selecting the Model Name".
29