Cross Fade Channels; Per-Channel Master Volume; Dc Offset - Qu-Bit Electronix Synapse User Manual

1. Cross Fade Channels

Each Cross Fade Channel has two inputs: A and B.
Inputs are DC-coupled, suitable for audio or control signals.
Cross Fade Channels also have a knob and CV input to control the blending of the two
inputs.
When a channel's cross fade knob is set fully counter-clockwise, only the A input signal
will pass to the outputs.
When a channel's cross fade knob is set fully clockwise, only the B input signal will pass
to the outputs.
CV range is -5V to 5V, and adds to the knob position.

Per-channel Master Volume

Each pair of inputs can have its master volume adjusted.
To adjust a channel's maximum volume, hold the Terminal encoder, and turn the channel's
cross fade knob.
The LEDs for the inputs will illuminate white and the brightness will correspond to the output
level.
When a channel's cross fade knob is set fully counter-clockwise, the A and B inputs for
that channel will be silenced.
When a channel's cross fade knob is set fully clockwise, the A and B inputs for that channel
will have their maximum volume set to unity.
+5V DC Offset
A +5V DC offset can be enabled, allowing the Synapse to become a stand alone modulation
device.
When enabled, a +5V DC signal will be applied to each channel's B input.
To activate the DC offset, hold the Terminal encoder and rotate the Memory knob.
8