Installing The Castor Wheels - Barco DP4K-L Series Installation Manual

1.10 Installing the castor wheels

C
AUTION
leveled.
C
AUTION
Necessary tools
• Open end wrench 17 mm
• Forklift
How to install the castor wheels on the chiller
1. Raise the chiller without tilting about 25 cm above the floor. Use a forklift.
Caution: Do not tilt the chiller!
2. Turn the four feet out of the chiller bottom plate. Use a 17 mm open end wrench to loosen the lock nut
of the foot.
3. Screw in the castor wheels. Use 17 mm open end wrench to fasten the castor wheel.
Image 1-17
R5905882 DP4K-L ACCESSORY KIT 06/09/2017
:
Only use castor wheels in case the surface where the chiller will stand is
:
Do not stack chillers with castor wheels mounted!
1. DP4K-L series accessory kit
13